On Windows, APC needs a temp path to exist, and be
writable by the web server. It checks TMP, TEMP,
USERPROFILE environment variables in that order
and finally tries the WINDOWS directory if none of
those are set.
The behaviour of these functions is affected by settings in php.ini.
Although the default APC settings are fine for many installations, serious
users should consider tuning the following parameters.
There are two main decisions you have to make. First, how much shared
memory do you want to set aside for APC, and second, whether you want APC
to check if a file has been modified on every request. The two ini
directives involved here are apc.shm_size and
apc.stat. Read the sections on these two directives
Once you have a running server, you should copy the
apc.php script that comes with the extension to
somewhere in your docroot and load it up in your browser. It provides
you with a detailed look at what is happening in your cache. If you
have GD enabled in PHP, it will even have pretty graphs. First thing
to check is of course that it is actually caching files. Assuming it is
working you should then pay close attention to the Cache full
count number on the left. That tells you the number of times
the cache has filled up and has had to forcefully clean up any entries
not accessed within the last apc.ttl seconds. You
should configure your cache to minimize this number. If you are constantly
filling your cache, the resulting cache churn is going to hurt performance.
You should either set more memory aside for APC, or use
apc.filters to cache fewer scripts.
Table 1. APC configuration options
> APC 3.0.6
> APC 3.0.6
> APC 3.0.9
For further details and definitions of the
PHP_INI_* constants, see the Appendix G.
Here's a short explanation of
the configuration directives.
apc.enabled can be set to 0 to disable APC. This is
primarily useful when APC is statically compiled
into PHP, since there is no other way to disable
it (when compiled as a DSO, the extension
line in php.ini can just be commented-out).
The number of shared memory segments to allocate
for the compiler cache. If APC is running out of
shared memory but you have already set
apc.shm_size as high as your system allows, you
can try raising this value.
A "hint" about the number of distinct source files
that will be included or requested on your web
server. Set to zero or omit if you're not sure;
this setting is mainly useful for sites that have
many thousands of source files.
The number of seconds a cache entry is allowed to
idle in a slot in case this cache entry slot is
needed by another entry. Leaving this at zero
means that your cache could potentially fill up
with stale entries while newer entries won't be
The number of seconds that a cache entry may
remain on the garbage-collection list. This value
provides a fail-safe in the event that a server
process dies while executing a cached source file;
if that source file is modified, the memory
allocated for the old version will not be
reclaimed until this TTL reached. Set to zero to
disable this feature.
A comma-separated list of POSIX extended regular
expressions. If any pattern matches the source
filename, the file will not be cached. Note that
the filename used for matching is the one passed
to include/require, not the absolute path. If the
first character of the expression is a + then the
expression will be additive in the sense that any
files matched by the expression will be cached, and
if the first character is a - then anything matched
will not be cached. The - case is the default, so
it can be left off.
If compiled with MMAP support by using --enable-mmap
this is the mktemp-style file_mask to pass to the
mmap module for determing whether your mmap'ed memory
region is going to be file-backed or shared memory
backed. For straight file-backed mmap, set it to
something like /tmp/apc.XXXXXX
(exactly 6 Xs).
To use POSIX-style shm_open/mmap put a .shm
somewhere in your mask. e.g. /apc.shm.XXXXXX
You can also set it to /dev/zero to use your
kernel's /dev/zero interface to anonymous mmap'ed
memory. Leaving it undefined will force an anonymous mmap.
On very busy servers whenever you start the server or
modify files you can create a race of many processes
all trying to cache the same file at the same time.
This option sets the percentage of processes that will
skip trying to cache an uncached file. Or think of it
as the probability of a single process to skip caching.
For example, setting apc.slam_defense
to 75 would mean that there is
a 75% chance that the process will not cache an uncached
file. So, the higher the setting the greater the defense
against cache slams. Setting this to 0
disables this feature.
When you modify a file on a live web server you really
should do so in an atomic manner. That is, write to a
temporary file and rename (mv) the file into its
permanent position when it is ready. Many text editors, cp, tar and
other such programs don't do this. This means that there
is a chance that a file is accessed (and cached) while it
is still being written to. This apc.file_update_protection
setting puts a delay on caching brand new files. The
default is 2 seconds which means that if the modification
timestamp (mtime) on a file shows that it is less than 2
seconds old when it is accessed, it will not be cached.
The unfortunate person who accessed this half-written file
will still see weirdness, but at least it won't persist.
If you are certain you always atomically update your files
by using something like rsync which does this correctly, you
can turn this protection off by setting it to 0. If you
have a system that is flooded with io causing some update
procedure to take longer than 2 seconds, you may want to
increase this a bit.
Mostly for testing and debugging. Setting this enables APC
for the CLI version of PHP. Normally you wouldn't want to
create, populate and tear down the APC cache on every CLI
request, but for various test scenarios it is handy to be
able to enable APC for the CLI version of APC easily.
Be careful if you change this setting. The default is for this to be On
which means that APC will stat (check) the script on each request to see
if it has been modified. If it has been modified it will recompile and
cache the new version. If you turn this setting off, it will not check.
That means that in order to have changes become active you need to
restart your web server. On a production server where you rarely
change the code, turning stats off can produce a significant performance
For included/required files this option applies as well, but note that
if you are using relative path includes (any path that doesn't start
with / on Unix) APC has to check in order to uniquely identify the file.
If you use absolute path includes APC can skip the stat and use that
absolute path as the unique identifier for the file.